Long a favorite of the rental industry, Multiquip diaphragm pumps deliver dependable performance and low maintenance in an economical package.
They are ideal for the slow seepage applications where a centrifugal pump would ordinarily lose its prime perfect for muddy water, sludge or any water with a high percentage of solids.

Features and benefits

• Moves 50 gallons (189 liters) a minute.
• Large flapper valves with readily replaceable seats.
• Maximum head of 50 feet (15 meters)
• Cast aluminum pump body for reduced weight.
• Dependable, easy starting Honda overhead valve (OHV) engines.
• Oil Bath Transmission with built-in 6:1 gear reduction allows use of engines with standard parallel-keyed shafts.
• Positive displacement design for quick, easy priming.
• Wheel Kits Standard for mobility.

Multiquip Water Pump	MQD-2H
Gallons Per Minute (GPM)	50 gpm
Suction & Discharge (in)	2 in.
Max Solids	1 in.
Max Lift (ft)	25 ft
Max Head (ft)	50 ft
Engine	3.5 HP Honda GX-120
Engine Rpm	3600 Rpm
Dimensions LxWxH in	41.5x 30x 22 in.
Weight (lb)	138 lbs





BUY

• Rugged, planetary powered tool designed to produce a flat, swirl free finish on counter tops, floors, walls and steps.
• The unit will grind, hone, polish or clean concrete, terrazzo, marble or granite surfaces using coated abrasives, diamond Resin pads.
• The system operates wet, as shown (slurry skirt provided), or dry with an optional dust cowl.
• There is also an handle assembly available for use on floors.
• This is a true planetary gear driven tool.
• The 12” platform turns at a lower rate than the higher rotational speed of the 5” platens.
• This combination of rpm provides the optimal speed for diamond polishing, producing a perfect finish 5 times faster than a single head polisher.
• The unit is powered by a heavy duty FEIN variable speed polisher (900-2700 rpm).
• A center coolant feed, precision bearings and sturdy construction make this the ultimate tool for perfect flatness and a superior polish.

• Voltage 115 v 60 Hz
• Current 10.5 Amps
• Driver Speed 900 to 2700 rpm
• Platform Speed 150 to 450 rpm
• Platen Speed 750 to 2250 rpm
• Platen Size 5”
• Tool Weight 30 lbs
• Crated Weight 47 lbs