Features:

• Folding handle for compact transport
• Lifting eye for easy loading by crane
• Fully closed V-belt guards meet today's safety requirements, while a range of accessories enables use in all kinds of applications
• Centrifugal clutch
• Standard protection frame

Available optional extras

• Polyurethane pad
• Water sprinkler system
• Undercarriage

Fields of application: Sand/gravel, asphalt, no-slump concrete, insulating materials, block pavements, foothpath paving stones

With its centrifugal force of 20 kN (4500 Lbs.) and a working width of 500 mm (20“), the CF 4 is ideally suited to the compaction of sand, gravel, no-slump concrete, small-grained crushed aggregates and insulating materials. Optional extras are available for use on the CF 4 to expand the range of operational applications. Adding a water sprinkler system and a polyurethene pad the CF 4 becomes the perfect compaction unit for asphalt and footpath slabs. As with all the machines of the new Webermt generation, the CF 4 vibratory plates feature the distinguishing characteristics of smooth running and stable vibration. The CF4 is available with a choice of either gasoline or diesel engines.

Technical Specifications

Weber mt	CF 4 R	CF 4 Hd/W
Weight kg (lbs)	10 (238)	107 (236)
Centrifugal Force kN	20 (4500lbs)	20 (4500lbs)
Frequency (rpm)	5400	5400
Operating Width	50cm (20in.)	50cm (20in.)
Engine	4-stroke Gas	4-stroke Gas
Engine type	Robin EY20	Honda GX160
Engine Output hp	5.7 hp	5.5 hp

• Dimensions: 77 inches long by 48 inches tall (When assembled)
• Warranty: Limited one year warranty
• The bench is portable to the job site. Weighs approximately 55 lbs.
• Setup on the jobsite means inserting the legs, adding the optional brace and standing it up. It takes just a minute to set up and be ready to go.
• Fabricate and polish 6 feet of tile at a time.
• Clamp a run of tiles in 30 seconds and start fabricating.
• The bench can be used to fabricate and polish tile from 4"x 4" to 24" x 24". Easily modified for almost any sized tile.
• The bench can be used for wet or dry polishing.
• The bench is made of cast and extruded aluminum. Water and/or dust won't damage it. The durability will stand up to the abuses of the job site.
• The bench is designed to be used with tools you already have, your grinder and pads and profiling wheels.
• Tiles are held from the bottom up. Adjustable spindles and leveling clamps hold tiles in place for a perfect edge and transition between tiles.
• Smooth transition of the finished edge between tiles regardless of tile thickness.
• Save substantial set up time, no "C" clamps and plywood, no shims.

Assumptions:
The average kitchen has 50 ft of counter top to bullnose and polish
The fabricator will charge $6 per foot for a total of $300.
You will charge your customer $9 per foot for bullnosing.
50 ft times $9 = $450 your income from customer
50 ft times $6 = $300 your cost to fabricate
$450 - $300 = $150 your profit

With the EdgeRight®:

Assumptions:
You pay your installer $18. per hour
Your installer fabricates 12' of tile per hour with the EdgeRight®, so you have approximately 4.25 hours invested in fabricating.
4.25 hrs times $18 = $76.50
50 ft times $9 = $450.00 your income from customer
$450 - $76.50 = $373.50 your profit.
You've increased your profit by $223.50 and paid for the EdgeRight® in 3-4 kitchens!

While this scenario doesn't consider the cost of the grinder and pads to do the job on-site, it also doesn't include the time and cost to package and ship or deliver the tile to a fabricator, or the delay on the jobsite while you are waiting for the finished tile to be returned.