Lightweight, portable, single phase submersible pumps are designed to handle water and solids.
Built for the demands of construction, mining, municipality and farm applications.

Features and benefits

• Lightweight, compact design for easy transport and positioning of pump.
• Built-in thermal protection prevents motor damage due to impeller blockage, reducing service repairs.
• Heavy-duty power cord with strain relief resists pullout and abrasion reducing costly repairs.
• Insulation on all conductors of the power cable are protected by a water block system to prevent wicking of water into the motor.
• Silicon carbide faced double mechanical seals run in an isolated oil-filled cavity, allowing for seal lubrication, cooling and overall motor protection.
• Preliminary v-ring or lip seal (depending on model) shields the mechanical seal from abrasive wear due to suspended debris in pumping fluid.
• Semi-vortex impeller allows for optimum wear resistance.

Description	Metric		Inch
Discharge diameter	80	mm	3	in
Length x width x height	240 x 240 x 570	mm	9.5 x 9.5 x 22.5	in
Operating weight	29,0	kg	64	lb
Max. head	26	m	85	ft
Max. discharge	493	l/min	130	US gpm
Max. pressure	2,55	bar	37	psi
Solid size capacity	8,5	mm	0.3	in
Motor type	Single phase/60 Hz
Voltage	220	V	220	V
Current (full load/start @ 220V)	13,0/70,0	A	13/70	A
Speed	3.465	1/min	3,465	rpm
Max. power output	2,2	kW	3	hp
Cable length	10	m	32	ft
Cable size	2,08	mm2	14	AWG
Impeller material	Ductile iron
Impeller type	Semi-vortex





BUY

Features:

• Forward and reverse travel
• Infinitely variable hydraulic control for precise work even under adverse conditions
• Throttle control lever at the guide bar
• Robust protection frame to prevent the engine from getting damaged
• Diesel model with engine guard
• Low maintenance due to self-adjusting centrifugal clutch
• Large, fixed lifting eyes for easy loading-also by means of forklifts
• Compaction quality assurance with COMPATROL

• Polyurethane pad
• Extension plates

The CR 6 is distinguished by superior performance: an impact power of 50 kN, an operating weight of 412 kg and a flexible working width. Thanks to the different possible working widths, the CR 6 is for instance also ideal for compaction of block pavements (70 cm) and without the extension plates (45 cm) for compaction in trenches. The commitment to quality has also been designed into details: self-cleaning baseplate, closed V-belt guard, self-adjusting centrifugal clutch and a sturdy protection frame (top closed) are characteristics that indicate optimum operational safety. The soil compactor CR 6 CCD is equipped with the new COMPATROL® compaction control system. One of the advantages of this Weber MT-innovation: the system performs a uniform check of the suitability for compaction of the soil to be compacted. Thus, weak points can be detected and eliminated immediately.

Technical Specifications

Weber Mt	CR 6	CR 6CCD
Weight kg (lbs)	412 (908)	416 (917)
Centrifugal Force kN	50 (11240lbs)	50 (11240lbs)
Frequency (rpm)	4350	4350
Operating Width	24(*18"-28")	24(*18"-28")
Engine	Diesel	Diesel
Engine type	Lombard 15LD400	Lombard 15LD400
Engine Output kW(hp)	3.5(4.7)	4.0(5.5)

*Operating width with extension plates

Click on image to
start 3D-Animation